Select Page

How to connect O-ring Chains Remarks to connect common O-ring Chains

1.A connecting website link of an O-ring Chain for basic application is pre-coated with grease on the pins. Before connection, verify the grease to the surfaces of pins, and if your amount of grease is compact, apply grease with bare hands. (If gloves are employed, the grease are going to be absorbed by the gloves.)
Example: When the connecting link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted with the roots in the pins. If the O-rings come loose because of vibration through transport, refit the O-rings in on the roots from the pins.
In this case, you should definitely return the grease collected in the roots in the pins for the central surfaces from the pins, extra at portion A than at portions B shown in the above illustration. (Portions A is worn because of sliding with all the bushings.)
two.The chain is usually most very easily linked to the teeth of a sprocket. Engage the links at both ends of your chain using the sprocket teeth and match connecting pins. In case the sprocket may be moved, the chain may also be connected within the loosened side.
three. Connecting procedure
1.Confirm that O-rings are connected to the roots on the pins.
two.When the quantity of grease utilized on the connecting pins is tiny, coat the pins with grease at the central portions.
three.Insert the connecting pins to the bushings in the inner back links at both ends.
4.Confirm that the grease is applied to the whole face in the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and although pressing the connecting plate, install the spring clip. Verify whether the head (the finish with no split) on the spring clip is turned within the feeding path with the chain. (See the next illustration.)
six.Make sure to confirm that the spring clip is securely fitted in the clip grooves from the connecting pins.
This completes jointing of your connecting link. Note that grease around the surfaces of connecting pins and O-rings might be removed during installation work. In this case, re-grease using the grease about the surface of the base chain or even the grease while in the polyethylene bag by which the connecting link was contained.

Tags:

Recent Posts

worm gearboxes

As one of leading worm gearboxes manufacturers, suppliers and exporters of mechanical products, We offer worm gearboxes and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm gearboxes