Material Dealing with Energy UNIT one
Basic Description
This electrical power unit is made for the fork lift sector, consisting of extremely efficient gear pump, DC motor, guide increase 
and decrease valve, tank, ect. The up and down motion are managed through the lever of the guide release valve, that’s equipped with an electric switch to activate the motor. The lowing speed is controlled from the strain compensated flow management valve.
Particular Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic parts concerned in advance of installation of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
four. Oil altering is required right after the original one hundred operation hours, afterwards as soon as every 3000 hours.
five. The energy unit shown is designed to be mounted horizontally.
Materials Handling Energy UNIT two
Basic Description
This electrical power unit attributes power up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering velocity controlled from the stress compensated movement handle valve. Products of this series may be extensively utilized in the business of logistic devices for example fork lift, mini lift table, and so on.
Specific Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic components concerned just before mounting the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which really should also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
four. Oil changing is required immediately after the original 100 operation hrs,afterwards once every single 3000 hours.
5. The electrical power unit needs to be mounted horizontally.