Select Page

servo gear reducer

3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for just about any servo electric motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next era cycloidal quickness reducer. It utilizes 52100 grade bearing metal on most of its speed decrease components. It is offered with a full two year warranty, not tied to hours of procedure, and can endure abuse that could break the teeth of ordinary acceleration reducers.
The EP 3000, readily available with inputs for both servo and induction motors, features a compact style with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Provided in two backlash ratings and multiple mounting choices, the EP 3000 includes a design tough enough for both servo and standard induction electric motor applications. The initial two piece pin casing design guarantees output shaft backlash rankings of less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows a credit card applicatoin to attain negligible backlash, maintain remarkable rigidity, and increase control stability to ensure that the desired output motion could be easily achieved. The look is truly a distinctive concept, utilizing a full contact screw-like tranny for high performance and elimination of put on. The unit provides maximum compactness using orthogonal axes and includes a big hollow shaft for versatility.

WORM SERVO GEAR REDUCER
Features
Wide range of servo gearboxes, made to fit virtually all servo motors found on the market
Designed for the highest torsional stiffness and the cheapest angular backlash, to get the maximum torque and overhung loads
Bush with slot machines and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The correct technical solution thanks to a comprehensive range of sizes, gear stages, transmission ratios, designs and non-standard designs.
Catalogs:
Servo equipment reducers (worm, coaxial, helical and bevel helical systems) Catalog SR
Operating instructions:
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our selection of Servo Reducers, now offering five levels of precision to meet any application requirements. The five degrees of precision offered allows a machine developer to select the required reducer precision to meet their needs and their budget. They are available in both in-line and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Common applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, E and B versions are identical, making it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of motor couplings and installation flanges are available for the entire reducer range to install virtually any servo engine and the hollow bore output can be utilized to mount output shafts, pinion shafts, or other drive elements.
These reducers are typically selected based on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces depend on the powered load, the rate vs. period profile for the cycle, and any other external forces acting on the axis. For more selection info, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. Your application information will be examined by our engineers, who’ll recommend the best solution for your application.
EP Inc. provides a full selection of modular servo gearboxes /worm reducers. The modular style allows for configurations with motor input flange and output pinion for rack and pinion drives, as well as solid output shafts, Hollow bore output, and input shafts for all other positioning applications. The modular style allows for universal mounting of the gearbox in any orientation.
They can be used on motors with a NEMA23 standard flange through an adaptor kit. As the gears are naturally angled, they lead to a short total length of the electric motor and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be built on the gear’s output side.
Built with a straightforward and robust design, the series has gearing ratios that range from 6:1 to 75:1. An individual can also customize the materials through the order, so as to match the gear to its intended program.
The Precision Planetary Gears of the EPRG series contains a thorough selection of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models also include versions with dual shaft, right angle shaft and right position output, as well as a full range of adapters for motor mounting, making them capable of meeting the requirements of also the most varied applications. They are made for make use of with included servo and stepper EP motors, mounted directly or via adaptor flanges, but can also be used with other EP electric motor types. This selection of products is based on years of experience and represents the end result of a decade-long study targeted at improving performance.
Optimum precision and dynamics, coupled with exceptional torque density, are the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for just about any program and any efficiency range. Our low-backlash planetary and right-angle gearboxes reflect our passion for development and the best levels of precision.
Worm gear reducers provide market advance solution with effectiveness and flexibility. Low quantity of basic models could be applied to a wide variety of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical devices. When the motor swiftness needs to be reduced, the result torque boosts and send torque completely to the application form. We believe that clients will appreciate our equipment reducer to accomplish their demand. Just check out EP, you can get more details about servo gearheads, servo gearboxes, and gear reducers. We always keep in the years ahead for your support.
Plug the Velocity Reducer in to the desired channel of your receiver, and plug the lead from your own servo (or servo wye) in to the man servo lead coming from the circuit plank. The established screw on the blue trim pot, located near the top of the primary circuit board, is used to control the velocity of the servo. Turn the set screw fully clockwise (CW) for normal servo speed without speed reduction, fully counter-clockwise (CCW) for maximum speed reduction, or anywhere in between for partial acceleration reduction. The reddish LED indicates three feasible conditions: Sluggish Blinking = No Transmission; Solid On = No Speed Reduction; Fast Blinking = Reduced Velocity Setting
Please note that if you make any alter to the speed establishing as the receiver is on, you need to cycle capacity to the receiver (switch if off and back again on) for the brand new speed setting to take effect. This circuit can also be utilized in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in opposite directions for right function. Instructions are included for easy installation and use.
IMPORTANT NOTE: This product will only focus on a regular, proportional servo. You won’t focus on a retract-type servo, as they do not identify any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, also by a transmitter that includes this function, as their style and electronics do not allow it. Examine the FAQ page to learn more.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a far more scale-like movement of flaps or retracts. Adjustable, it could be set to lessen the swiftness of your servo from super-slow motion to no speed reduction at all, with an nearly infinite amount of positions in between. Maximum reduction time for a servo to travel 90 degrees is about 14 seconds, minimum period (no reduction) is simply the normal rate of the servo. Great for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by use of a normal servo Y.
This is the new regulated version that can be used on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/LiFE batteries. This unit will NOT reduce the voltage going to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging devices, gantries, injection molding devices, pick and place, and linear slides.Provided in concentric shaft, correct position solid shaft, and right angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to easily mount to any manufacturer’s servo engine. The EP Series helical gears have got slanted teeth in comparison to spur gears with straight cut teeth, producing a smoother gear mesh, yielding significantly lower noise levels.
The low backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance elements.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units are available in the following versions:
PSC = B5 output, soft output shaft
PSKC = B5 output, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway

Click on this link to learn why you require servo gear reducer.

Tags:

Recent Posts

worm gearboxes

As one of leading worm gearboxes manufacturers, suppliers and exporters of mechanical products, We offer worm gearboxes and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm gearboxes