The high-end economy lines GSN & GFE combine powerful with financial efficiency: both lines are also built with helical ground gears, ensuring the very least noise level and smooth running. The entire needle bearing has been especially made to reach high torques that beat the competition for units of the same size. All planetary carriers are produced as a cage created from solid materials. This increases noiseless operating characteristics while at the same time improving positioning precision and reducing backlash. An additional shaft sealing band ensures maximum dirt and splash water safety relative to protection class IP65 in all lines.
One way to reduce backlash is by using precision gears. The focus on production in precision gears is definitely tighter tolerances, so all over the gear will be a tighter, more specific suit. And the tighter match means much less play in the apparatus teeth, which is the cause of backlash in the first place. Of program, precision gears are more expensive, but if the application demands high accuracy, after that precision gearing may be the way to go.
From a gear design perspective, an easy way to lessen backlash is to ensure the teeth mesh tightly together. This is typically done by shortening the center distance between gears. For pre-loading, this could be done using a spring mechanism to hold the gears firmly in place. This also eliminates the play between your gear teeth and thus eliminates backlash.
Of course, the kind of gears used may also have a huge impact on the amount of backlash. So for example, some equipment types such as stress wave gears, or harmonic equipment drives, have zero backlash.
The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Due to the lower torque values, the input stage is dimensionally smaller than the result stage. Its short style makes the GSD line the perfect high-end gearbox for space limited applications. The low standard backlash of the GSD range makes it the perfect fit for highly powerful applications where highest positioning and swiftness accuracy is required. The flange output produces highest torsional rigidity. For the lodging of particularly high axial loads, taper roller bearings are optionally available in sizes with 90 mm diameter or more. The GSB line stands for high performance in 
mixture with low backlash and high precision. Its robust, one-piece housing permits a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL series provide same advantages as the GSB line; the right angle form makes the GSBL range an ideal match for all powerful applications where space is bound.
See our site to read more information about worm drive servo.