Worm get gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where a simple to match, high torque output is required. Great for student based jobs which includes robots and buggies.
The unit has been designed so that the output shaft can be ‘clicked’ in and out for modification. E.g. cutting down to size. The electric motor is snap fitted into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on 
load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and other applications where large torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to a few amps, making them perfect candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, also at very low voltages. We recommend that you use stall-detection sensors, or just see your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on small threaded end of the shaft, although it is not particularly designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new requirements for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration now and a future proof solution. The Ever-Power gear motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box can be mounted in substitute positions rotated in 90º steps around the motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total solution for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be utilized outside or in wet and dusty environments without the usage of additional enclosures. Complete rated output is offered by the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a corner turn, optional dual output, or perhaps an inability for the motor to be back again driven. The DC right angle equipment motors are designed for continuous and intermittent duty operation. Our right angle gear reducers were created with several mounting plate choices, making them perfect for a variety of DC motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a small package size. Worm Gear Motors are excellent for applications that require a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision lower gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Devices / Security Gates / Teeth Chairs / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with among our Worm Gearheads. EP Items will work with you to design and manufacture a Worm Gear Electric motor that will optimize the overall performance of your unique application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Chop / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for toughness and a high torque output. Due to the special mechanical structure of the worm get the motor output shaft is usually self locking and may not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially show their power in applications where superior gear ratios are necessary. Our worm geared motors will be for that reason optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to meet your needs.
Worm gear products impress with their high power density and compact style. If required, we can also supply them with the impressive nsd tupH surface treatment.
As well as the basic EP housing, you can expect an extensive line of bolt-on components to customize the product including torque arms, shaft addresses and output flanges. These can be easily field installed, but we will also be glad to assemble the average person components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear devices feature a soft, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product preferably suited for severe and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides unique repairing possibilities and enable an easy assembling for the customer.
Various other drive configurationscan be created by use of built-about add-ons (e.g. torque arm and output flanges). The housings are made in light weight building out of aluminium die cast. Electric motor attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where an easy to fit, high torque result is required, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, perfect for student based projects including robots and buggies.
Most suitable for applications where an easy to match, high torque outcome is required
Ideal for student based projects including robots and buggies
Reversible Huge torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Huge torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC electric motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that’s, in the case of motor without electrical, the output axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole electric motor output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where large holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option compared to the spur gear motor. Why is worm gear so particular? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (input shaft vs result shaft) is not reversible when working with large reduction ratios, due to the higher friction involved between the worm and worm-wheel, when usually a single start (a single spiral) worm is used. This is often a advantage when it’s desired to eliminate any probability of the result driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
worm motor is utilised to fit in any daily regimen.